eBaybuy Listing Reader

Independent research on listing claims. No platform affiliation.

Gucci Black Playful Squirrel T-Shirt Review: Two 776 Colourways, One Print, and What the Variant Name Doesn't Tell You

We ordered both 776 colourways in size L and wore them for two weeks. The print held, the collar ribbing recovered, and the stated 1–3 cm tolerance covered the 1 cm gap between our two shirts. Score: 4.2 / 5.

Gucci Black Playful Squirrel T-Shirt Review: Two 776 Colourways, One Print, and What the Variant Name Doesn't Tell You
By Devon ParkReviews Editor Hands-on product testing, packaging inspection, fit checks, and delivery timing

We ordered the Gucci Black Playful Squirrel Streetwear T-Shirt in both listed colourways — 776 black and 776 white — in size L, under SKU 7715739435. The sticker price on the row was $3.43 against a $3.79 original, marked in stock when we checked out; agent fees and consolidated shipping took our landed cost to $10.05, and the parcel reached our Portland bench 15 days after checkout. The listing describes combed cotton, a regular fit, a crew neck, short sleeves and a cartoon squirrel print, framed as a 2026 summer release for daily wear.

Two colourways, one print, two different readings

Variant names on this listing are the least useful part of it: 776 black and 776 white are internal codes, not descriptions. Nothing in the option labels separates fabric, fit or print method between them. So we treated the two shirts as separate samples and measured each one flat, three times per dimension, the morning after unpacking.

Flat measurement, size L776 black776 whiteListing claim
Pit to pit53.0 cm53.5 cmRegular fit, 1–3 cm tolerance
Shoulder, seam to seam46.0 cm46.5 cmRegular fit
Body length, high point to hem71.0 cm72.0 cmRegular fit
Hem width53.5 cm54.0 cmNot stated
Collar opening17.5 cm17.5 cmCrew neck
Sleeve, shoulder to cuff21.5 cm21.5 cmShort sleeve
Fabric weight (10 cm swatch maths)~205 gsm~208 gsm180–250 gsm, standard thickness

The widest split between the two shirts was 1.0 cm at the body length, which sits inside the tolerance the listing itself publishes. That is a modest point in the seller's favour: the stated 1–3 cm error range is wide enough to look like a hedge, but on our two samples it was honest rather than decorative. The fabric weight landed near the lower-middle of the 180–250 gsm band, consistent with the "standard thickness, breathable" wording rather than a heavyweight tee.

What the variant name does not tell you

Three things a buyer would reasonably want are absent from both the option labels and the item specifics: fibre percentage, print method, and country of manufacture.

  • Fibre: the listing says combed cotton for the main fabric. It does not give a blend percentage. Our burn test on a loose fibre end is not something we will report as proof; we are flagging the gap, not filling it.
  • Print method: under a 10× loupe, the ink on both colourways sits on the surface with a shallow raised edge and no visible halftone dot screen. That reads to us like a screen print rather than direct-to-garment, but we cannot confirm the process from the outside of a shirt.
  • Origin and care: the care label on both shirts is short and translated awkwardly; it does not name a wash temperature above the symbols, so we washed at 30 °C on our own initiative.

Print under a loupe

Print quality is the check authentication guides point to first on graphic Gucci tees: genuine prints are described as having crisp lettering and vibrant colour that does not fade or bleed. We applied that standard to what arrived, with a caveat — a loupe check can tell you whether a print is clean, not whether a print is authorised.

On the black shirt the squirrel motif and brand lettering were square to the collar seam, with the graphic's centre line landing within 4 mm of the collar's midpoint. The white shirt was 6 mm off in the same direction, which is inside what we would accept on a graphic tee at any price. Edges were sharp, the ink did not spider into the cotton, and the lettering held its counters. The black colourway read slightly denser because the white base layer under the print is invisible against black; on the white shirt you can see the print's own white underlay at the graphic's outer edge if you tilt it to a window.

"The squirrel on the black shirt is the cleaner print of the two — not because the artwork differs, but because the underlay disappears against the shell. On white, you can see where the printer stopped." — bench note, day two

Wear, wash and the collar

We wore each shirt six days across two weeks and washed both once at 30 °C, line dried. Shrinkage was under 0.5 cm in body length on both, which is inside measurement noise. The crew-neck ribbing stretched to 19.5 cm when pulled over the head and came back to 17.7 cm after five minutes flat, so the ribbing recovered but not perfectly — expect a slightly softer collar after a few months, not a wave. Seams at the shoulder, side and hem were straight with no loose thread ends that we could pull free.

Sizing is where we would slow down. Gucci T-shirt threads commonly advise going one size up for a regular-fit Gucci shirt, and one buyer complaint we found is the awkward gap between M and L on certain Gucci tees. Our L measured 53 cm pit to pit, which sits close to a standard US L rather than a roomy one. If you are between sizes, or you want the relaxed drape the streetwear framing implies, the one-size-up advice holds. Check shoulder and length against a shirt you already own, because shrinkage warnings on Gucci tee guides are common and the care label here will not settle the question.

Against two alternatives

ComparisonThis shirtPlain 220 gsm black crewLicensed graphic tee, mid-price
Landed cost$10.05~$18~$35
Print centring4–6 mm off centreNo print2 mm off centre
Collar rib recovery17.5 to 17.7 cmReturned to 17.4 cmReturned to 17.6 cm
Fabric handLight, dry, slightly crispHeavier, denserSofter, more drape

The plain crew wins on fabric density and the licensed tee wins on print precision, but both cost more than this listing landed for. That is the honest trade: you are paying for a graphic look and extended sizing, not for a heavyweight blank.

How this scores 4.2 / 5

The score reflects what we could verify by hand. Measurements matched published claims within the stated tolerance, the print was clean and near-centre on two separate samples, and the collar ribbing behaved predictably through wear and one wash. It loses ground on the gaps the listing never fills — fibre percentage, print method, origin — and on a white colourway whose print underlay shows at the edges. That is a good graphic tee with unverified claims attached, not an excellent one.

What works
  • Print held shape and colour through one wash and two weeks of wear on both colourways.
  • Published 1–3 cm tolerance matched our two samples, which split by 1.0 cm at most.
  • Extended sizing runs S to 5XL, which is unusual for a graphic tee.
Watch-outs
  • Fibre percentage, print method and origin are all missing from the listing.
  • White 776 colourway shows its print underlay at the graphic's outer edge.
  • Fit is a true regular, so the one-size-up advice applies if you want drape.
Who this is for
Buyers who want a black or white crew-neck with a cartoon print, need extended sizing to 5XL, and will measure their own shirt against the listed numbers before ordering.
Who should skip
Anyone who needs verified print durability or fibre content before buying, or who wants a fit settled by buyer consensus rather than a regular-fit label and a 1–3 cm tolerance.
Editor verdict
Print sat square to the collar seam in both colourways, collar ribbing recovered after a 30 °C wash, and the stated 1–3 cm tolerance covered the 1 cm gap between our two shirts. A low-risk graphic tee.

Frequently asked

Is the 776 white colourway the same shirt as the 776 black?
Same pattern, print and size range, but not identical in the hand. Our white sample measured up to 1.0 cm longer, slightly heavier, and showed the print's white underlay along the graphic's outer edge when tilted to light.
How far off centre was the print?
Within 4 mm of the collar midpoint on black and 6 mm on white. Both were acceptable to us, and neither shifted after one 30 °C wash or six days of wear.
What does the 1–3 cm tolerance cover in practice?
Differences between individual shirts of the same size, not between sizes. Our two size L shirts split by 1.0 cm at body length and 0.5 cm at the chest, so the published range held on our samples.

Sources and notes

  1. Catalog product page
    Product listing verified on 2026-11-06.

Community feedback 4

Reader score 4 / 5 (4 ratings)

noracooks 3 / 5
I ordered one colourway only, the darker 776. Print holding up ok but the fabric is thinner than I expected for what it costs. The review is honest about the two-shirt test but mine came with a loose thread at the hem. Not returning it, just noting it. Maybe I got a bad one.
luca.andrei 4 / 5
Wore mine two weekends in a row, washed cold and hung dry. Ribbing bounced back fine. I would not put it in the dryer though, that is how you kill collar recovery. Wish the review had said what the actual measured length was for size L, but I get that they only had two shirts. 4.2 feels fair.
tb_griffin 5 / 5
The bit about the variant name not telling you everything is real. I ordered thinking both 776 options were same cut, they are not exactly. Laid them flat and got about 1.5 cm difference in chest. The 1-3 cm tolerance line in the review is the most useful thing I read before buying. Squirrel print is loud in a good way.
marisol_h 4 / 5
Got the black 776 in medium for my brother and the other 776 for me, both fit different but the sizing note said 1-3 cm so whatever. Print did not crack after like 10 washes which honestly surprised me. One star off because the collar on his started looking rough faster than mine. Still decent for the price.